2024 Unbak IC-2500SA Mobile Steel Framing Factory

$0.00

This is a complete Unbak ICARUS IC-XMobile mobile factory. An IC-2500SA light gauge steel framing machine and a coil decoiler are installed inside a 40 ft shipping container, and a diesel generator supplies power. The unit produces wall panels, roof trusses and lattice joists directly on a job site, with no fixed plant required.

The IC-2500SA roll-forms C and U profiles from S350 high-strength steel up to 16 gauge (0.063 in / 1.6 mm). It produces three web widths, 2.5 in, 3.5 in and 6 in as standard, with a 1.6 in flange, and changes web width through semi-automatic, manual adjustment. The rollformer has 12 gear-driven stations. An 11 kW (14.8 hp) hydraulic unit drives seven inline tooling operations: dimple, web notch, lip notch, service hole, truss end, swage and cut to length. Profiles are inkjet-marked.

The PLC control has a 21 in touchscreen and accepts files from Vertex BD, FrameBuilder MRD and StrucSoft. OEM features include Unbak’s SABS steel anti-blocking system and remote control support.

Power comes from a 2024 Arken ARK-Y 45 L6 diesel generator set rated 41.9 kVA standby and 38.1 kVA prime, 400 V, 3-phase, 60 Hz. It sits in a dedicated compartment with an exhaust system, a main disconnect and a fire extinguisher.

OEM-rated output is up to 2,625 ft/hr for wall panels and 656 ft/hr for trusses and lattice joists. Actual output varies with the framing design.

The unit suits builders, developers and framing contractors who produce LGS framing for remote sites, multi-unit developments or modular projects.

This is a complete Unbak ICARUS IC-XMobile mobile factory. An IC-2500SA light gauge steel framing machine and a coil decoiler are installed inside a 40 ft shipping container, and a diesel generator supplies power. The unit produces wall panels, roof trusses and lattice joists directly on a job site, with no fixed plant required.

The IC-2500SA roll-forms C and U profiles from S350 high-strength steel up to 16 gauge (0.063 in / 1.6 mm). It produces three web widths, 2.5 in, 3.5 in and 6 in as standard, with a 1.6 in flange, and changes web width through semi-automatic, manual adjustment. The rollformer has 12 gear-driven stations. An 11 kW (14.8 hp) hydraulic unit drives seven inline tooling operations: dimple, web notch, lip notch, service hole, truss end, swage and cut to length. Profiles are inkjet-marked.

The PLC control has a 21 in touchscreen and accepts files from Vertex BD, FrameBuilder MRD and StrucSoft. OEM features include Unbak’s SABS steel anti-blocking system and remote control support.

Power comes from a 2024 Arken ARK-Y 45 L6 diesel generator set rated 41.9 kVA standby and 38.1 kVA prime, 400 V, 3-phase, 60 Hz. It sits in a dedicated compartment with an exhaust system, a main disconnect and a fire extinguisher.

OEM-rated output is up to 2,625 ft/hr for wall panels and 656 ft/hr for trusses and lattice joists. Actual output varies with the framing design.

The unit suits builders, developers and framing contractors who produce LGS framing for remote sites, multi-unit developments or modular projects.

SPECS - Framing Machine

Production Types: Wall panels, roof trusses, lattice joists
Steel Grade: S350
Web Widths: 2.5 in, 3.5 in, 6 in (60 / 90 / 150 mm) standard, or three custom sizes
Flange Height: 1.6 in (41.3 mm)
Profile Capacity: 3 C-sections, 3 U-sections
Web Width Change: Semi-automatic, manual adjustment
Forming Stations: 12
Drive Type: Gear-driven rollform
Main Motor: 29 Nm (21.4 lb-ft)
Hydraulic Motor: 11 kW (14.8 hp)

Hydraulic Oil Tank: 39.6 gal (150 L)
Standard Tooling: Dimple, web notch, lip notch, service hole, truss end, swage, cut to length
Production Speed, Wall Panel: Up to 2,625 ft/hr (800 m/hr)
Production Speed, Truss / Lattice Joist: Up to 656 ft/hr (200 m/hr)
Control: PLC with 21 in touchscreen
Profile Marking: Inkjet
Compatible Design Software: Vertex BD, FrameBuilder MRD, StrucSoft
SABS (Steel Anti-Blocking System): Yes
Remote Control: Supported

SPECS - Generator

Year of Manufacture: 2024
Engine Model: 4TNV98-GGEA
Alternator Model: PRO18ME/4
Standby Rating (ESP): 41.9 kVA / 60.6 A
Prime Rating (PRP): 38.1 kVA / 55 A
Voltage: 400 V

Phase: 3-phase, star connection
Frequency: 60 Hz
Speed: 1,800 rpm
Power Factor: 0.8
Performance Class: G3 (ISO 8528)
Genset Weight: Approx. 1,989 lb (902 kg)