This 2012 RAS XL-Center is an automatic sheet metal bending center for architectural and fabricated sheet metal parts. RAS Reinhardt Maschinenbau of Germany built it. The machine bends both up and down, so parts do not need to be turned over between bends.
It has a 126 in maximum working length and handles mild steel up to 16 ga (0.059" / 1.5 mm). A gripper-based backgauge with 0.255 to 29.5 in of depth positions each part to ±0.006 in. The stop grippers incline ±0.78 in, so the machine can fold tapered parts.
Folding beam tooling rolls away from the flange during the bend. This allows scratch-free bending of pre-coated material. The folding beam also has 300 degrees of free space in front of it, which supports complex profiles.
Cycle speeds:
The machine suits metal roofing, wall panel, flashing, gutter, trim and HVAC fabricators running high-mix sheet metal profiles.
This 2012 RAS XL-Center is an automatic sheet metal bending center for architectural and fabricated sheet metal parts. RAS Reinhardt Maschinenbau of Germany built it. The machine bends both up and down, so parts do not need to be turned over between bends.
It has a 126 in maximum working length and handles mild steel up to 16 ga (0.059" / 1.5 mm). A gripper-based backgauge with 0.255 to 29.5 in of depth positions each part to ±0.006 in. The stop grippers incline ±0.78 in, so the machine can fold tapered parts.
Folding beam tooling rolls away from the flange during the bend. This allows scratch-free bending of pre-coated material. The folding beam also has 300 degrees of free space in front of it, which supports complex profiles.
Cycle speeds:
The machine suits metal roofing, wall panel, flashing, gutter, trim and HVAC fabricators running high-mix sheet metal profiles.